Service.tesla.com
Replacing the Low Voltage Lead-Acid Battery
WebInstall the lead-acid battery hold down and use a 10mm socket to tighten the nut that secures it to the 12V battery. Torque the nut to 6 Nm (4.4 ft-lb). Reconnect the first responder loop. Remove the protective caps from the positive (+) and negative (-) posts on the new low voltage lead-acid battery.
Actived: 1 days ago
Replacing the Low Voltage Lead-Acid Battery
WebInstall the positive (+) terminal cover. Connect the negative (-) terminal by positioning the terminal clamp over the connector. Using a 10mm socket, torque the nut to 6 Nm (4.4 ft-lb). Connect the vent tube hose into the negative (-) terminal side of the low voltage lead-acid battery. Replace the cabin intake duct.
Vehicle Service Intervals
WebYour vehicle should generally be serviced on an as-needed basis. However, Tesla recommends the following maintenance items and intervals, as applicable to your vehicle, to ensure continued reliability and efficiency of your Model Y. Brake fluid health check every 4 years (replace if necessary)*. A/C desiccant bag replacement every 4 years.
MCI Diode Test and Resistance Test (MCI Health Tests)
WebThe MCI diode test is used to ensure the diode in the MCI is functioning as expected. To perform a diode test: Connect the red lead of a digital multimeter to the MC4+ lead of an MCI. Connect the black lead of the digital multimeter to the MC4- lead of the MCI. Turn the dial on the multimeter to the Ohm symbol, then push the SEL button twice to
VIN Recall Search
WebVIN Recall Search. Enter your complete 17-digit Vehicle Identification Number (VIN) to get the latest information on any open safety recalls that apply to your Tesla vehicle. You can conveniently schedule and manage Service Appointments, view and approve estimates and review service history all through the Tesla App. If you have questions or
Install / Update Tesla One
WebTo update Tesla One: Select More in the bottom right corner of the screen, then select Settings. Select Software Version. If an update is available, select Update. Note. Tesla One gets new features every week, so update frequently! The app should automatically update but it is best practice to check for new updates, and manually update when one
Air Bag and Supplementary Restraint System (SRS) Precautions
WebWarning. Do not expose an air bag module or seat belt pre-tensioner to heat exceeding 85°C. These precautions are not restricted to operations performed when servicing the SRS; the same care must be exercised when working on other systems and components located near the SRS components: Steering system: Driver’s air bag, clockspring.
Install Mid-Circuit Interrupters in PV Array
WebInstall the Tesla MCI in line with the PV modules using standard Staubli Type MC4 certified compatible connectors. Ensure the MCI is minimum 12.7 mm (½ in) from glass or backside of a PV module. For flat plate solar panel installations, ensure the MCIs do not directly contact the roof. For Solar Roof installations, see the Solar Roof
Top Categories
Popular Searched
› Advocate health foot and ankle
› Gusto health insurance decline
› Internal health authority lab appointment
› Which health insurance covers wegovy
› Psycological health scholarship in pronay
Recently Searched
› Online health insurance plans means
› Amazon sunny health and fitness
› Durham regional health immunizations
› National foundation health insurance company
› Gusto health insurance hours
› Cottage health hospital visiting hours